| By: Ryan Edun |
Number One Tool Any Roofer Should Have on the Job
The best tool that a roofer should have is a good nail gun. While most nail guns are quick, some are definitely quicker than others. By using a coil nail versus a stick nail gun, jobs can get done quicker. They also work great with any pipe support system.
Hammering Out the Details
Another tool every roofer should have is a good hammer. The right size hammer can really make all the difference, especially with tough jobs. When working on a roof, it can be dangerous to go up and down a ladder just to get the necessary tools. Have a good hammer on your tool belt and it could not only save time but it can make the job safer.
The Ladder to Success
Of course, no roofer could do anything without a sturdy ladder. This item is often underestimated. Going up and down the same ladder can cause a lot of stress, which means it should periodically replaced.
Nail Down Any Job
Since roofing requires a lot of nails, a good magnetic sweeper is a must. These not only save a lot of time, they save a lot of money. Especially for the homeowner. Loose nails can be dangerous if left on the ground.
Measure the Alternatives
Any good roofer will tell you that they cannot do any roof without a good measuring tape. It should be at least 25 feet and very stiff. It will ensure that the tiles will be placed in the right area.
Cut Tiles Without Fuss
A utility knife is another must. There is no other way to cut tiles down to the proper size without one. A good, sharp blade will save time. It is vital that safety be observed while using it, though.
Clean Old Messes
Removing old nails, tiles and other items cannot be done correctly without a decent pry bar. It is easy to use and can remove a multitude of items. It fits in easily in a tool belt and really is priceless.
Saw the Right Way
A good hand saw cannot be underestimated. This is number 8 on the top ten list. It ca be used on the roof and is great for last minute cuts. Be sure to purchase a lot extension cord or buy one with a rechargeable battery.
Perfect Seams
The last two items are a hand seamer and seaming tongs. They are versatile and inexpensive. They are perfect for metal roofing. The better seamer you get, the faster any job will go.
Reasons to Have the Right Tools
Over all, these top 10 tools for roofers will help make any job easier. Placing them in a tool belt or a bucket can be sure that they do not get lost and can also make it more simple to take on and off any roof.
Advice Interactive Group is a blogger for Alpine Roofing Construction. http://www.alpineroofingconstruction.com/roofer-dallas-tx.html
Did you find what you were looking for? Check out these other articles for more roofing information:
Using a hammer and nail to hammer down a roof isn't practical. Take a look at the roofing nail gun options available.
A buyers guide to buying a new roof. Learn about roofing installation, roof shingles and roofing contractors.
When dealing with roof leaks, place flashing high on the list of usual suspects. It is the most common thing to go awry, and chimney leaks are no different.
Shingles cover 80% of America's homes, but they are far from being all the same. Today's shingles come in a large variety of colors, styles, and materials to meet any homeowner's demands.
A roofing contractor, in charge of roof repair, roof installation or roof replacement and other jobs will have an identification number starting with "CCC". An "RC" provides the county or city registration directive. Remember, this is only for those who have been certified by the state.
Gutters and downspouts are available in many styles, colors, and materials. Prices vary greatly between the different types of materials.
Immediate Response!
